FBT JMAXX 110A
JMAXX 110A
Processed Active Speaker
MAIN APPLICATIONS
- Live sound PA system or live sound monitor
- DJ system
- School and corporate audio visual sound reinforcement
- Background music/announcements: restaurants, pubs
- Transportation terminals, clubs, auditoriums, theatres, gyms, houses of worship
MAIN FEATURES
- Processed 2-way active loudspeaker
- Sturdy gas-injected polypropylene molded enclosure
- 10" LF woofer and 2" voice coil
- 1" exit throat HF compression driver
- DSP with 4 EQ presets
- 2 x M10 suspension points, 1.38" top-hat speaker stand socket, wall bracket mount flange plate
- Stage monitor angling facility with 12°, 40°, 55° taper
- Completely manufactured in Italy
DESCRIPTION
The FBT JMaxX 110A two-way active reinforcement speaker system shall incorporate 1 x 10" LF woofer with a 2" voice coil and a 1" exit throat HF compression driver with a 1" voice coil coupled to a 90°H x 60°V constant directivity horn. Thanks to the asymmetrical shape, it also allows use as a stage floor monitor at 12°, 40°, and 55°. The FBT JMaxX 110A shall meet the following performance criteria: frequency response of 58Hz to 20kHz, maximum SPL of 129.5 dB, 700W RMS + 200W RMS Class D power amplifiers. The FBT JMaxX 110A provides a DSP with 4 factory equalization presets. With its eye-catching gas-injected forms designed to virtually eliminate undesired enclosure resonance and reinforce strong low-frequency performance, the FBT JMaxX provides a myriad of possibilities for bands, DJs, and solo artists. A front-face steel grille protects the woofer from external damage. The control panel provides XLR/Jack input, XLR link, level, preset switch, HP filter button, line/mic button, and two status LEDs (PRT-LIMITER / ON). The two M10 fly points built into the cabinet, along with the optional mounting bracket, allow the FBT JMaxX 110A speaker to be surface mounted on walls or ceilings. The standard 1.38" speaker stand socket allows the FBT JMaxX 110A to be mounted on a speaker stand.
TECHNICAL SPECIFICATIONS
GENERAL
| Code | 42604 | |
|---|---|---|
| Configuration | way | 2 |
| Low frequency woofer | inch | 10 - 2 coil |
| High frequency driver | inch | 1 - 1 coil |
ACOUSTIC SPECIFICATIONS
| Frequency response (@-6dB) | Hz | 58 - 20k |
|---|---|---|
| MAX SPL (cont/peak)** | dB | 123.5 / 129.5 |
| Crossover frequency | Hz | 1.8k |
| Dispersion | H° x V° | 90 x 60 |
INPUTS & OUTPUTS
| Input connectors | XLR / Jack |
|---|
POWER SUPPLY
| AC power requirement | W | 600 |
|---|---|---|
| Power cord | mt | 5 |
| ft | 16.4 |
AMPLIFIER
| Built-in amplifier* | MAX (LF/HF) | W RMS | 700 / 200 |
|---|---|---|---|
| MAX peak (LF/HF) | W | 1400 / 400 | |
| Input impedance | Ohm | 22k |
MECHANICAL SPECIFICATIONS
| Material | Polypropylene | |
|---|---|---|
| Net dimensions (WxHxD) | mm | 320 x 550 x 275 |
| inch | 12.6 x 21.6 x 10.8 | |
| Transport dimensions (WxHxD) | mm | 408 x 650 x 360 |
| inch | 16.06 x 25.59 x 14.17 | |
| Net weight | kg | 11.50 |
| lb | 25.35 | |
| Transport weight | kg | 13.50 |
| lb | 29.76 |
**MAX: 2mS burst, RMS power on nominal speaker impedance
**MAX peak: based on MAX peak output voltage and nominal speaker impedance.
**Cont SPL: free space, based on power amp rating and LF transducer average sensitivity data, 125mS time average
**Peak SPL: free space, based on MAX peak power amp rating and system peak sensitivity, 10mS time average
DIMENSIONAL DRAWING
CONTROL PANEL
ACCESSORIES
BOX-127
Horizontal Wall Bracket
Code: 33328
556 x 70 x 268mm
21.88 x 2.75 x 10.55inch
2 kg / 4.40 lb
FBT ELETTRONICA S.p.A. strives to improve its products continuously and therefore reserves the right to make changes to the drawings and technical specifications at any time and without notice.
FBT ELETTRONICA SpA - Recanati (Italy) | www.fbt.it | info@fbt.it