INVGROUP
INVGROUP

// News item

Jack plug vs. processor: two worlds, one rack – where does the budget go?

Jack plug vs. processor: two worlds, one rack – where does the budget go?

Sometimes the smallest component determines whether the show goes on. And sometimes without a processor, it won’t even start. The Invotone J120S solderable jack plug and the FBT DLM-260 system processor are in two completely different weight classes – yet both are there in the industry where sound matters. Let’s see what each is for and why it’s worth knowing both.

Invotone J120S – the workshop staple that always gets you out of trouble

The solderable 6.3mm stereo jack is the type of component you’ll never put in the spotlight at a concert – but without it, the sound won’t start. Repair, custom length, special wiring: when you can’t just grab a ready-made cable off the shelf, that’s when the J120S comes in. Three conductors, clean contacts, unscrewable body – for microphones, instruments, insert points, headphones, anywhere stereo signal flows.

In rehearsal rooms and on tour alike, it’s the tool you must always carry: if a cable breaks, if you need to make a custom length, if something turns out to be wrong with the wiring on site. The J120S doesn’t work miracles – but it reliably does its job, and that’s exactly the point.

FBT DLM-260 – compact brain with six outputs

The FBT DLM-260 is a completely different playing field. 2-input, 6-output processor, specifically tuned for FBT speakers – but it has a place in any active system. The 32 preset memory switches at the press of a button between indoor, outdoor and custom settings. The LCD display shows RMS and peak levels, and parameters are edited from PC via USB: delay, crossover, EQ, limiter – separately for each output.

The 130 × 841 × 130 mm size fits in a 1U rack, and the 2.5 kg weight doesn’t burden the installation. Deployable for both installation and touring systems: six XLR outputs separately controllable, so active three-way, dual-sided FOH, monitors, subwoofer – everything covered from a single unit.

Who uses what for?

The Invotone J120S is the tool of the technician, the sound engineer, the musician who assembles, repairs, builds systems. Not flashy, not cool – but indispensable. If you have a workshop, a rack or a tour case, always keep ten J120S units in the drawer.

The FBT DLM-260 is the cornerstone of installation and touring systems. Church, theatre, event venue – anywhere variable acoustics meets fixed system, the preset-based quick switching and separately controllable outputs give enormous freedom. On tour, 32 venue presets mean you don’t have to tune from scratch every day – load the preset, fine-tune, the show goes on.

Parameters that matter

For the J120S, there’s no specification – stereo jack, three conductors, solderable body. That’s it. But that’s the beauty of it: you don’t need anything else, just a soldering iron and a skilled hand.

The DLM-260, however, is a parameter powerhouse:

  • 2 × XLR input, 6 × XLR output – stereo source, complex system
  • 32 presets, LCD display – quick switching, clear status
  • RMS and PEAK control – you see the signal flow
  • USB port, PC communication – detailed editing, saving, reloading

When to choose which?

If you’re repairing, building, making custom lengths – the Invotone J120S is your friend. If you have a fixed system, play multiple venues, or would use active speakers without a processor – don’t even start without the FBT DLM-260. The J120S is the survival kit, the DLM-260 is the control. One makes the system work, the other makes it controllable.

Two worlds, two price levels, one profession. And both are there in the rack, in the tour case, in the workshop – because professional sound isn’t just about the big boxes. Sometimes it’s a jack plug, sometimes it’s a processor – but always what’s needed at the moment.

Featured products

FBT DLM-260 Low stock −18%

364 900 Ft 299 000 Ft Gross · VAT 27%